Character integrated ceiling pay attention to ceil

2022-07-22
  • Detail

Compared with other household parts, the ceiling is not easy to get dirty because of its high height and few people touch it. However, the cleaning and maintenance of the ceiling cannot be ignored. So, what are the skills of ceiling cleaning

compared with other household parts, the ceiling is not easy to get dirty because of its high height and few people touch it. However, the cleaning and maintenance of the ceiling cannot be ignored. So, what are the skills of ceiling cleaning

first, avoid using hard objects to clean the ceiling

when cleaning the ceiling of the bright panel, special attention should be paid not to scrub it with tools such as hard objects and cleaning balls, because this will leave scratched strips on the bright panel, thus affecting the beauty of the ceiling

second, deep cleaning should be carried out regularly.

the film coated plate should be deeply cleaned once a month. The wire drawing plate and nano roller coated plate can be cleaned half a year, or even once a year. The deep cleaning should be carried out twice, the first time with a wet soft cloth, the second time with clean water, open the window for ventilation and dry naturally

III. cleaning of the integrated ceiling in the bathroom

often scrub with soft cloth and water. In a month or two, it's OK to clean the kitchen once. If the gusset plate is poor, it's better to clean less and take care of it. At ordinary times, use a soft cloth to remove the dust, because the more you clean, the faster the rust will come out

IV. cleaning of the integrated ceiling in the kitchen

the gusset plate in the kitchen is more roller coated, and some people use the film board in order to save money. For roller coated gusset plate, use a small amount of detergent, but there should be enough water to mix in. Use a soft cloth with good water absorption to wipe it after touching it with water, but when it is on the four edges, the force should be light

special attention should be paid not to use hard cloths and cleaning balls. Once scrubbed, many small filaments will be left on the bright panel, damaging the gusset plate. Because there are many iron components in the film, it is easy to rust after seeing water. After scrubbing with a soft towel stained with water for the first time, scrub with water for the second time, and then open the window for ventilation and dry naturally

北京胎记疤痕医院

成都肝病医院

武汉性病医院

太原性病医院

Copyright © 2011 JIN SHI